Seeking Feedback: Mining architectures building 300T Storage!

Lotus Storage Miner

1 X EPYC 7402/2.8GHz/128M/24C/48T/180W/3200MHz
1 X Quadro RTX6000/576bit/GDDR6/24GB/4608C/295W/4DP/PCIE3.0x16
8 X 32GB/DDR4/2400 or 2666MHz or 2933MHz/ECC/REG=256GB
1 X Intel/SSD/DC/S4600/S4610 Series(3.84TB,2.5in SATA 6Gb/s ,3D Nand,TLC)

2 Processes:Lotus 和 Lotus Storage Miner

Lotus Seal Worker 1

1 X EPYC 7F32/3.7GHz/128M/8C/16T/180W
8 X 64GB/DDR4/2400 or 2666MHz or 2933MHz/ECC/REG=512GB
6 X Intel/SSD/DC/S4600/S4610 Series(1.92TB,2.5in SATA 6Gb/s ,3D Nand,TLC)=11.52TB

6 Processes:Lotus Seal Worker Precomm 1

Lotus Seal Worker 2

1 X EPYC 7402/2.8GHz/128M/24C/48T/180W/3200MHz
2 X Quadro RTX6000/576bit/GDDR6/24GB/4608C/295W/4DP/PCIE3.0x16
8 X 32GB/DDR4/2400 or 2666MHz or 2933MHz/ECC/REG=256GB
1 X Intel/SSD/DC/S4600/S4610 Series(3.84TB,2.5in SATA 6Gb/s ,3D Nand,TLC)

3 Processes:Lotus Seal Worker Precomm 2(GPU), Lotus Seal Worker Comm 1(CPU), Lotus Seal Worker Comm 2(GPU)

Storage

(2 X) Intel Xeon Silver 4210 Processor/2.20 GHz/13.75 MB/10C/20T/85 W/2UPI/2400MHz
(4 X)16GB/DDR4/2400 or 2666MHz or 2933MHz/ECC/REG
(1 X)SSD/480GB/SATA 6Gb/2.5in
(36 X)14TB/SATA/7200RPM/3.5in

My questions:

1.Should i put Lotus Storage Miner and Storage in one server?
2.If I have multiple seal workers is it better to have them all in one server or separate servers?
3.I’m planning to setup 300T of storage, what is a good hardware layout above minimum requirements to optimize that amount of storage for ROI?

emphasized text

2 Likes

配置搭配不合理,建议你上b站看看石榴矿池他们推荐的配置